Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateTrusted Garage Door Repair for Waltham Homeowners
A garage door that won’t open, won’t close, or comes down crooked is a problem you need solved today, not next week. Our technicians work on garage doors and openers exclusively, with up to 15 years of experience, so they arrive already familiar with the door and opener in your garage instead of learning it on your driveway. We dispatch across Waltham, from the triple-deckers near Moody Street to the older two-car garages off Trapelo Road, and same-day service is often possible. We answer 24/7. Call (833) 637-5863 and we’ll get a trained technician headed your way with fast dispatch from 7am to 7pm.
One call covers the whole system: the door panels and hardware, the opener, and the high-tension springs. Because we’re Waltham Garage Door Repair Co and nothing else, the diagnostic path is short. A binding track, a frayed cable or a tired opener shows itself fast to someone who sees these failures every week. Every price is quoted and agreed before any work starts. A free estimate means exactly that: no cost, no obligation, and no surprises once the door is apart.
What Our Garage Door Repair Service Includes
Garage door problems almost always trace back to one of six failure points. Here’s what each repair involves and how we approach it in Waltham.
Panel Replacement
Panels are the visible face of the door, and they take the beating: a backed-into door, a stray impact, or years of New England freeze-thaw working a seam loose. When a panel is dented, cracked or separating from its stiles, the door loses structural rigidity and starts to bind in the tracks. We identify the panel, match it to the door’s profile and color wherever the manufacturer still makes it, and replace just the damaged section when the rest of the door is sound. If the door is a Clopay or Amarr model, we know the common profiles and can often source a match without replacing the whole door.

Spring Repair
Torsion and extension springs carry the full weight of the door, and they’re the most dangerous component in the entire system. A spring that’s snapped, stretched out or making a sharp bang when the door moves needs a trained technician, not a handyman and certainly not a homeowner with a winding bar. We replace torsion springs in matched pairs as a rule, because a new spring paired with a tired one will fail early, and we tension and balance the door afterward so the opener isn’t fighting the spring. If a spring fails on a Saturday, we’re closed that day, but call and we’ll book you into the next opening, Sunday through Friday.

Cable Repair
Lift cables run from the bottom corners of the door up to the drums, and they’re under the same tension as the springs. A frayed, kinked or snapped cable makes the door drop unevenly or jam, and it’s a genuine safety issue because the door can come down hard on one side. We replace cables in pairs, inspect the drums and bottom brackets while we’re in there, and rebalance the door before we call the job done. A cable that’s started to fray is a warning, not a maybe; it should be replaced before it fails completely.

Track Realignment
The vertical and horizontal tracks guide the door through its travel, and a bend of even a quarter inch throws the whole door off. Doors that scrape, jump the rollers or refuse to close all the way often have a track that’s been knocked out of plumb, frequently by a car bumper or a shifted wall anchor. We straighten and realign the track, verify it’s square to the opening, and check that the rollers are seated properly. A door that’s been running on a bent track for months will usually need roller attention too, and we’ll tell you if that’s the case.
Roller Replacement
Rollers are small, cheap parts that make a big difference in how the door sounds and moves. Steel rollers wear flat spots, nylon rollers crack, and worn rollers rattle, squeal and drag on the track, which puts extra strain on the opener. We replace rollers as a set, because mixing new rollers with worn ones just means you’ll be back under the door in six months. Once they’re swapped, the door runs quieter and the opener gets a break.
Sensor Calibration
The safety sensors at the bottom of the tracks tell the opener to reverse when something is in the way, and when they’re misaligned or dirty, the door either won’t close or closes on an obstacle. We check alignment, clean the lenses, verify the wiring and confirm the opener’s reverse test works the way it should. This is one of the quickest repairs we do, and it’s also one of the most important, especially in a house with kids or pets. If you have a LiftMaster or Chamberlain opener, the sensor indicator light tells us a lot before we even pull out a tool.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Brands We Service for Garage Door Repair
We work on the brands that actually show up in Waltham garages, and we know where each one tends to wear out. LiftMaster and Chamberlain openers share a lot of internal architecture, and we know the logic board and travel-module quirks on both, including the myQ connected models where a Wi-Fi issue can look like a mechanical failure. Genie openers have their own gear and carriage design, and we’ve seen enough of them to diagnose a stripped gear by sound alone. On the door side, Clopay and Amarr panels have specific profiles and finishes, and we can usually identify a match from a photo of the section stamp before we order anything.
Wayne Dalton, Craftsman and Raynor round out the list, and each has its own habits: Wayne Dalton’s TorqueMaster torsion systems need a different approach than a standard torsion tube, Craftsman openers are often older units still running fine with a single worn part, and Raynor doors hold up well but their hardware still wears with age. Whether your door is a Clopay, your opener is a Genie, or you’re not sure what you have, we can help. Bring us the brand name off the label or send a photo, and we’ll come prepared. If you’d rather start with a related repair, our garage door repair page covers the full scope, and neighbors in Wayland and Bedford get the same brand-specific approach.
Signs You Need Garage Door Repair Right Now
- The door won’t close, or reverses immediately. This is usually a sensor or track problem, and it’s a security issue because the garage stays open. It’s also one of the fastest repairs we make, so call and we’ll get it sorted.
- A loud bang from the garage, then the door won’t lift. That sound is almost always a snapped torsion spring. Don’t try to lift the door by hand with an opener attachment still connected; leave it and call. Spring replacement is a specialist job for good reason.
- The door comes down crooked or drifts to one side. A door that’s uneven is running on a stretched cable, a broken spring or a bent track, and every cycle puts more stress on the opener and the door’s frame. It won’t correct itself, and it can get worse fast.
- Grinding, squealing or a rattling track. Worn rollers and dry or misaligned tracks make noise before they fail. A door that’s been noisy for weeks is telling you something; catching it early usually keeps the repair small.
- The door opens partway and stops, or the opener strains. A door that’s heavy to lift by hand is a spring or balance problem, and the opener is doing work it wasn’t designed for. Left alone, the opener’s gear or logic board can fail too, turning one repair into two.
Our Garage Door Repair Process – Step by Step
- 1
Phone diagnosis and scheduling. We ask what the door is doing, what brand it is, and whether the opener runs at all. That conversation usually narrows the problem to one or two possibilities before we schedule, and it means the technician arrives with the right parts in mind.
- 2
On-site inspection. The technician tests the door by hand with the opener disconnected, checks spring tension, cable condition, roller wear, track alignment and sensor function. We listen to the opener under load and look at the logic board if there’s an electrical symptom. This is where the real diagnosis happens.
- 3
Written estimate before any work. You get the findings and a written price for the repair, including parts. Nothing starts until you approve it. If we find a secondary issue, we show you and quote it separately, so there are no surprise line items at the end.
- 4
The repair itself. We do the work with the door in a safe position, replace springs in pairs, and rebalance the door after any spring, cable or panel work. We test the safety reverse and sensor function before we touch the opener’s travel settings.
- 5
Final test and walkthrough. We cycle the door several times, confirm it’s balanced and quiet, and show you what was replaced. If there’s anything to keep an eye on, we tell you, and the written estimate is the final price.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Repair Cost in Waltham?
Garage door repair in Waltham typically runs $150 – $600, depending on which part failed and how much of the system is involved. Here’s how that breaks down for the most common jobs. A spring repair is estimated at $180 – $340 for one spring, and since a matched pair is usually replaced together, a pair runs about twice that. Cable repair is estimated at $130 – $250, track realignment at $120 – $240, roller replacement at $110 – $220, and panel replacement at $250 – $500. Opener repair, if the drive system is the problem, is estimated at $120 – $320.
| Repair | Typical Estimated Range |
|---|---|
| Garage door repair (overall) | $150 – $600 |
| Spring repair (one spring) | $180 – $340 |
| Matched pair of springs | About twice the single-spring range |
| Cable repair | $130 – $250 |
| Panel replacement | $250 – $500 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| Opener repair | $120 – $320 |
What moves the number: the type of spring and door weight, whether panels are still made in your door’s profile, how much the opener was strained before the door was fixed, and whether the tracks or bottom brackets need attention alongside the main repair. The way to avoid overpaying is simple: get the diagnosis and the written price before anyone starts, and don’t let a repair get bundled without a reason you understand. Our free estimate covers the inspection and the written quote, and the written estimate sets the final price. Call (833) 637-5863 for an exact quote.
Garage Door Repair Near Waltham – Our Service Area
We connect homeowners across the Waltham area with trained garage door technicians, including Wayland, Bedford, Concord, West Concord, Maynard, Acton, Stow, Medfield and Littleton Common. Waltham jobs are handled first, and nearby towns are usually scheduled the same day or the next opening. Waltham’s older housing stock means we see a lot of heavy wooden and steel doors on original hardware, which behave differently from newer panels. Whether you’re in Waltham or a surrounding town, one call covers the door, the opener and the springs. The garage door repair page has the full service detail, and our garage door repair page covers the Bedford side of the service area.
Serving Waltham, MA – Our Local Coverage Area
We serve Waltham and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Garage Door Repair in Waltham
Garage door repair is fixing a specific failed component on an existing door: a spring, cable, roller, panel, track, sensor or opener part. It’s different from installation, which is replacing the whole door or opener. We service the door hardware, the opener and the springs, so any one failure point is covered. The Waltham Garage Door Repair Co team focuses on repairs, not new construction. Call (833) 637-5863 for an exact quote.
Most repairs take between one and three hours. A sensor calibration or roller swap is usually under an hour, while a spring replacement with rebalancing or a panel replacement takes longer because the door has to be tested through several full cycles. Track realignment and cable work sit in the middle. We’ll give you a realistic time estimate when we schedule so you can plan your day. Call (833) 637-5863 for an exact quote.
Most garage door repairs in Waltham are estimated at $150 – $600, with spring repair at $180 – $340 for one spring and smaller jobs like rollers or track work starting around $110 – $240. A matched pair of springs runs about twice the single-spring range because they’re replaced together. Panel replacement is estimated at $250 – $500 and opener repair at $120 – $320. The written estimate sets the final price, and it’s agreed before any work starts. Call (833) 637-5863 for an exact quote; estimates are free.
Yes. We service LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman and Raynor equipment. That includes connected openers like LiftMaster myQ and Genie Aladdin Connect, where a Wi-Fi or logic issue can mimic a mechanical failure. Our technicians know the common wear points on each brand, which shortens the diagnostic. If you’re not sure what brand you have, a photo of the label is enough. Call (833) 637-5863 for an exact quote.
Same-day service is often possible, and we dispatch Sunday through Friday. We answer 24/7, and fast dispatch runs from 7am to 7pm. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. We’re closed Saturday. Call (833) 637-5863 for an exact quote.
Our warranty terms are confirmed with you in the written estimate before the work starts, so you know exactly what’s covered on the parts and labor. Spring and cable repairs are the most safety-critical work we do, and we stand behind the installation. If something we replaced acts up, we want to hear about it. Call (833) 637-5863 to confirm the warranty on your specific repair.
Clear the area under and around the door, and if you can, move cars out of the garage bay so the technician has room to work. Have the opener’s remote or wall button ready so we can test the drive, and note the brand and model if you can see them. If the door is stuck open, leave it and don’t try to force it down. Call (833) 637-5863 for an exact quote.
Schedule Your Garage Door Repair Service in Waltham Today
A door that won’t close is a door you can’t leave behind, and a spring that’s snapped won’t fix itself. Call (833) 637-5863 for a free, no-obligation estimate on your garage door repair in Waltham. We answer 24/7, dispatch from 7am to 7pm Sunday through Friday, and quote the price before any work starts. Our technicians have up to 15 years of experience with the brands in your garage.
Written by the team at Waltham Garage Door Repair Co.